Fujitsu RX900 S1 User Manual
86
Maintenance Manual
RX900
S1
Hard disk and solid state drives
6.2.4
Removing the HDD/SSD module
Ê
Pull the HDD/SSD module out a few centimeters.
Ê
Wait for at least 60 seconds.
I
This period is necessary for the RAID controller to recognize that an
HDD/SSD module has been removed and for the hard disk drive to
come to a stop.
HDD/SSD module has been removed and for the hard disk drive to
come to a stop.
Ê
Pull the HDD/SSD module out completely.
6.2.5
Completing the task
Perform one of the following procedures to complete the task:
1.
2.
6.3
Removing the HDD/SSD module
6.3.1
Required tools
●
Starting and completing the task:
–
key for the rack doors (if applicable)
●
Removing the HDD/SSD module: tool-less
6.3.2
Starting the task
Ê
Perform the following procedures:
1.
Trained personnel