Fujitsu RX600 S6 User Manual

60

Operating Manual

 RX600 

S6

ID indicator (blue)

Lights up blue when the system has been selected by pressing 
the ID button. To deactivate, press the button again.

The ID indicator can also be activated via the ServerView 
Operations Manager and the iRMC S2 Web interface and its 
status reported to the ServerView Operations Manager and the 
iRMC S2.

Power-on indicator (green/orange/yellow)

Lights up green – and also lights up orange for less than one 
second – when the server is switched ON.

Lights up orange when the server is in shutdown mode (operating 
system shutdown) or is switched off.

Lights up yellow during power on delay.

CSS indicator (yellow)

– Lights up yellow if a prefailure event was detected for a CSS 

component that you can fix yourself (for reasons of precaution) 
with the CSS concept.

– Flashes yellow if an error was detected that you can fix 

yourself with the CSS concept.

– Does not light up when the system is OK.

If the event is still acute after a power failure, the indicator is 
activated after the restart.

The indicator also lights up in standby mode.

For more information on the CSS concept, see 

HDD/SSD activity indicator (green)

Lights up green when an internal hard disk drive or solid state 
drive is accessed.