Fujitsu RX600 S6 User Manual
62
Operating Manual
RX600
S6
Starting up and operation
5.1.1.4
Indicators on the hot-plug HDD/SSD modules
Figure 9: Indicators on a hot-plug HDD/SSDmodule
If a hard disk drive continuously indicates an error, the drive should be replaced
as soon as possible. This can be done during operation (see
as soon as possible. This can be done during operation (see
).
1
HDD/SSD BUSY (green)
– Lights up: HDD/SSD in active phase (drive active, drive being
accessed)
– Does not light: HDD/SSD inactive (drive inactive)
2
HDD/SSD FAULT (orange)
– Does not light: no HDD/SSD error
– Lights up: HDD/SSD Faulty or Rebuild Stopped (drive defective/needs
– Lights up: HDD/SSD Faulty or Rebuild Stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD/SSD module is
not correctly inserted)
not correctly inserted)
– Slow flashing: HDD/SSD Rebuild (the data is being restored after
changing a drive)
1 2