Fujitsu TX200 S6 User Manual

TX200 S6

Operating Manual

79

This section contains information about configuring the server and installing the 
operating system.

I

Make sure that the power saving functions are disabled in the 

 

menu of the BIOS Setup during operation.

A 6-port SATA controller is integrated on the system board. You can configure 
the onboard SATA controller either before or during installation with the 
ServerView Installation Manager. Using the ServerView Installation Manager is 
recommended.

I

The controller has its own configuration utility. For further information, 
refer to the "Embedded MegaRAID Software User’s Guide" (on the 
ServerView Suite DVD 2 under 

 - 

 

- 

 - 

).

I

Descriptions of operating systems not covered in the controller manual 
are provided in the corresponding readme files on the driver CDs.

I

To control SAS hard disk drives an additional SAS/SATA RAID controller 
is necessary (see the following section).

The server has a SAS/SATA RAID controller with "Integrated Mirroring 
Enhanced" functionality or "MegaRAID functionality". You can configure the 
SAS/SATA RAID controller either before or during installation with the 
ServerView Installation Manager. Using the ServerView Installation Manager is 
recommended.

I

The controller makes a separate utility available for IME configuration. 
For further information, refer to the "Integrated RAID for SAS User’s 
Guide" (on the ServerView Suite DVD 2 under 

 - 

 - 

 - 

).