Fujitsu 2000 SERIES User Manual
CHAPTER 3 Component Configuration and Replacement (Add, Remove)
3.4 Expansion of components
3.4 Expansion of components
51
C122-E175-01EN
Remarks
If the device is used as a SWAP device, the formatting must have a 4K sector size.
If the device is used as a SWAP device, the formatting must have a 4K sector size.
c
fio-attach (Making the device available on the operating system)
Example:
Example:
# fio-detach /dev/fct0
# fio-format -b 4K /dev/fct0
# fio-attach /dev/fct0
# fio-format -b 4K /dev/fct0
# fio-attach /dev/fct0
Remarks
For details on each command, see ‘Appendix A-Utility Reference’ in the ‘PCIeSSD-785GB/PCIeSSD-
1.2TB ioMemory VSL x.x.x User Guide for Linux’. x.x.x. is the version number.
For details on each command, see ‘Appendix A-Utility Reference’ in the ‘PCIeSSD-785GB/PCIeSSD-
1.2TB ioMemory VSL x.x.x User Guide for Linux’. x.x.x. is the version number.
8. Create a swap entry for the replaced PCI Express card.
Remarks
A partition must be created before creating a swap entry.
Example:
A partition must be created before creating a swap entry.
Example:
# mkswap /dev/fioa1
# swapon /dev/fioa1
# swapon /dev/fioa1
9. Confirm the serial number of the replaced PCI Express card.
10. Register the serial number of the replaced PCI Express card in the pre-allocate memory in
/etc/modprobe.d/iomemory-vsl.conf.
Note
After replacing the PCI Express card, add the target serial number in the pre-allocate memory in
/etc/modprobe.d/iomemory-vsl.conf.
Note
After replacing the PCI Express card, add the target serial number in the pre-allocate memory in
/etc/modprobe.d/iomemory-vsl.conf.
11. Restart the partition (opening system).
3.4
Expansion of components
This section describes how to add components.
The components and the conditions for maintaining the addition of each component are listed in the table
below.
Some components cannot be added.
The components and the conditions for maintaining the addition of each component are listed in the table
below.
Some components cannot be added.
TABLE 3.12 Expandable components
Component name
AC power off
(Device stop)
AC power on
All partitions off
(hot
maintenance)
AC power on
Target partition
off (hot
maintenance)
AC power on
Target partition
on (hot
maintenance)
PSU_P/PSU_S
Expandable
Not
Expandable
Expandable
Not Expandable
Not Expandable
FANM
-
-
-
-
FANU
-
-
-
-
FANM
-
-
-
-
SB
Expandable
Expandable
Expandable
Expandable (*2)
CPU
Expandable
Expandable
Expandable
Not expandable
DIMM
Expandable
Expandable
Expandable
Not expandable
Mezzanine
-
-
-
-
DIMM
Expandable
Expandable
Expandable
Not expandable
PCI Express card
Expandable
Expandable
Expandable
Not expandable
FBU
Expandable
Expandable
Expandable
Not expandable
HDD/SSD (*3)
Expandable
Expandable
Expandable
Expandable
battery
-
-
-
-
IOU_1GbE/IOU_10GbE
Expandable
Expandable
Expandable
Expandable (*2)
PCI Express card
Expandable
Expandable
Expandable
Not expandable
DU
Expandable
Expandable
Expandable
Not expandable
PCI Express card
Expandable
Expandable
Expandable
Not expandable
FBU
-
-
-
-
HDD/SSD
Expandable
Expandable
Expandable
Expandable
MMB (*3)
Expandable
Expandable
Expandable
Expandable
OPL
-
-
-
-