Fujitsu RX200 User Manual

24

Options Guide    

 

 

Processors

V

You may only use processors of the same type on the system board. 

Ê

Open the server as described in the chapter “Preparation” on page 15f.

Ê

Remove the ventilation duct (see page 20).

Figure 11: Removing the processor heat sink 

Ê

Remove the four screws of the heat sink in diagonally opposite sequence 
(see figure).

Ê

Turn the heat sink carefully back and forth to loosen it. Then lift it out to 
remove it.

Ê

Remove the residual thermal paste from the underside of the heat sink.

Ê

Clean the underside of the heat sink using a lint-free cloth.