Fujitsu RX200 User Manual
46
Options Guide
Closing the server
Completion
Figure 26: Installing the server
Ê
Slide the server into the rack (1).
I
After you have inserted the server, you should pull it out again as far
as it will go and then push it back in. This ensures that the server runs
cleanly on the telescopic rails.
as it will go and then push it back in. This ensures that the server runs
cleanly on the telescopic rails.
Ê
Fasten the server at the front using the two knurled screws (2).
Ê
Plug in the power plugs and switch the server on.
2
1
2