Lucent Technologies 555-233-115 User Manual

Issue 1

April 2000

Upgrading R5si/R6si to R8r EPN and Adding Memory 

3-50

Release 5/6si to Release 8r 

Use 1 front ground plate between 2 

stacked cabinets.

1. At the front of the cabinets, align the holes in the top of the front ground 

plate with the holes at the bottom of the upper cabinet, and insert the 4 
screws. Do not tighten the screws yet. See 

2. At the front of the cabinets, align the holes in the bottom of the front 

ground plate with the holes at the top of the lower cabinet. Insert the 4 
supplied #12-24 x 1/2-inch (1.27 cm) thread-forming screws. Do not 
tighten the screws yet.

3. Repeat Steps 1 and 2 until all stacked cabinets are fastened together.

4. Tighten all screws securely.

—

1. Front Ground Plate or Cabinet Clip

2. Battery

3. Rear Ground Plate

grdpltec LJK 031096