Lucent Technologies 555-233-115 User Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r

555-233-115

Issue 1

April 2000

G3vs with Intel 386 or Risc Processor to R8r

4-12

Install the Release 8r Cabinets

Restore Disk Full

1. Type restore disk full and press

Enter

. This instructs the system to copy

the entire removable media to disk and takes about 30 minutes to
complete. Release 8 system software with translations are now resident on
the disk.

NOTE:

Until this command finishes, the system provides no user feedback
on the management terminal. Do not press

Enter

while the command

executes. Doing so causes the terminal screen to clear as the
command finishes, erasing any success/failure messages the
system may provide.

2. Type upgrade software G3V8r.xx.x.xxx.x

<entire alphanumeric

string of target software version>

and press

Enter

. This takes

about 15 minutes to complete. For Release 5, this is call preserving.

3. Login as craft at the

prompt.

Set Daylight Savings Rules

You can set up to 15 customized daylight savings time rules. If you have switches
in several different time zones, you can set up rules for each. A daylight savings
time rule specifies the exact time when you want to transition to and from daylight
savings time. It also specifies the increment at which to transition.

NOTE:

The default daylight savings rule is 0, no daylight savings.

1. Type change daylight-savings-rules and press

Enter

DAYLIGHT SAVINGS RULES

Rule

Change Day

Month

___

Date Time

____

Increment

No Daylight Savings

Start: first Sunday___ on or after April___ 1 at _2:00 01:00
Stop: first Sunday___ on or after October_ 25 at _2:00

Start: first _________ on or after ____ __ at __:__
Stop: first _________ on or after ____ __ at __:__