Lucent Technologies 555-233-115 User Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r

555-233-115

Issue 1

April 2000

Upgrading G3rV2, V3, V4 to R8r and Adding Memory

1-4

Task Tables

Task Tables

Table 1-2

lists the high-level tasks to perform the upgrades. Refer to the

appropriate page for instructions for each step.

The upgrade procedure is similar for both the standard and high or critical
reliability system with a few exceptions. These exceptions are noted as you go
through the steps.

Table 1-2.

Tasks to upgrade the software and hardware

√

Task Description

Page

Save Announcements (if necessary)

1-6

Back Up Disk

1-6

Disable Scheduled Maintenance and Alarm Origination to INADS

1-7

Reconfigure the Tape (G3rV2, V3 R31.0 and Earlier)

Install Disk Drive (if not TN1657 V4 or earlier)

Busyout MMI Circuit Packs (H/C only)

1-10

Lock the active SPE (H/C only)

1-10

Check the active tone-clock (H/C only)

1-11

Power Down the Processor Carrier

1-11

Remove the Circuit Packs

1-11

Install the Circuit Packs

1-12

Power Up the Processor Carrier

1-14

Unlock the Active SPE (H/C only)

1-14

Continued on next page