Lucent Technologies 555-233-115 User Manual

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r

555-233-115

Issue 1

April 2000

Upgrading G3rV2, V3, V4 to R8r and Adding Memory

1-21

Upgrade the software and hardware

Release MMI (H/C only)

1. Type release board

cabinet carrier slot and press

Enter

to release the

circuit packs, which were busied out earlier.

Resolve Alarms

1. Type display alarms and press

Enter

to examine the alarm log. Resolve

any alarms that may exist using

DEFINITY Enterprise Communications

Server Release 8 Maintenance for R8r.

Check Link Status

1. Type display communication-interface links and press

Enter

. Compare it

with the earlier status.

2. Type status link

number and press

Enter

. Repeat this step for each link.

Enable Scheduled Maintenance

1. Type change system-parameters maintenance and press

Enter

2. Type the appropriate time in the

Start

field to enable scheduled daily

maintenance. Make sure the

Save Translation

field is set to daily.

Enable Customer Options and Alarm Origination
to INADS

1. Get the DOSS order number of the upgrade from the project manager and

ask the regional Customer Software Administration to complete the steps
in the shaded box. See

for telephone numbers.

NOTE:

As part of the system registration process, the INADS Database
Administrator enables Alarm Origination and customer options.

2. When administration is completed, log in as craft at the

prompt.