Intel SE7501CW2 User Manual

An ATX 2.03-compliant I/O shield is provided with your server board. The shield is required 
by Electromagnetic Interference (EMI) regulations. It minimizes EMI and helps obtain proper 
cooling of the server. 

The shield fits the rectangular opening near the power supply in the back of the chassis. The 
shield has cutouts that match the external I/O connectors of the server board (such as the 
keyboard and mouse connectors).  

1.  Remove the two backing strips from the gasket. 

2.  Press the gasket onto the inside face of the I/O shield as 

shown. 

1.  Remove the backing from the label included with your server 

board. 

2.  Press the label onto the outside face of the I/O shield (A).  

 
 

Installing the I/O Shield  

Install the I/O shield from inside the chassis, with the label facing outward.  

1.  Insert one edge, and rotate the I/O shield into the chassis cutout.  

2.  Press firmly until the I/O shield clicks into place. 

9