Wacom DTK-2200 User Manual

92

92

4. Review the instructions that came with your stand or mounting platform.  Be sure you understand them, 

and follow all instructions carefully.  Pay attention to any cautions or other safety information.

5. Using the appropriate VESA mounting screws for your platform and as indicated above, firmly attach 

the pen display to the mounting platform.

6. Reattach the cabling between the pen display and your computer.  As necessary, refer to 

.

To remove the pen display from a VESA mount: 

1. Turn off your computer and power off Cintiq.  Then disconnect all cables from between Cintiq and your 

computer.

2. Remove Cintiq from the alternate mounting platform.

3. Place the pen display face down on a flat, soft surface (such as a cloth spread across a desktop).

4. Remove the rear cover and unthread the cables from the cable channel.  After freeing up the cables, 

replace the cover. 

Warning

When attaching the pen display onto an alternate 
mounting platform, be sure to follow all instructions in 
the documentation supplied by the platform 
manufacturer.  If improperly installed, the pen display 
could fall, resulting in physical injury or damage to the 
product.

Cable channel

Cables should be threaded through this 
opening without crimping.

Ensure the cables are not pinched beneath 
the VESA attachment.