Homesmart Appliance SRS-LYNC-XL User Manual
APPENDIX C
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
124
smarttech.com/kb/170450
Port
Description
Use
664
DMTF out-of-band secure
web services management
protocol
web services management
protocol
Secure ASF-RMCP
Secure RMCP pings
NOTE
This port is a standard DMTF port and accepts
WS-Management traffic. It’s always enabled.
WS-Management traffic. It’s always enabled.
5900
Virtual Network Computing
(VNC) remote control
program
(VNC) remote control
program
KVM viewers that don’t use Intel AMT authentication
but use the standard VNC port instead
but use the standard VNC port instead
Intel MEBx controls
The following are the controls in Intel MEBx:
Control
Procedure
Notes (if any)
Intel® ME General Settings
Change ME Password
Type a new Intel AMT password.
The default password is admin.
When you first open Intel MEBx, you’re
prompted to change the password.
prompted to change the password.
SMART recommends not changing this
control from its default setting.
control from its default setting.
Local FW Update
Select Enabled to enable local firmware
updates.
updates.
OR
Select Disabled to disable local firmware
updates.
updates.
OR
Select Password Protected to protect local
firmware updates using the Intel AMT
password.
firmware updates using the Intel AMT
password.
SMART recommends not changing this
control from its default setting.
control from its default setting.
Power Control
Intel® ME ON in Host
Sleep Status
Sleep Status
Select a power package.
SMART recommends not changing this
control from its default setting.
control from its default setting.
Idle Timeout
Type the idle timeout (in minutes).
SMART recommends not changing this
control from its default setting.
control from its default setting.