Philips HD4918 User Manual

Never use any accessories or parts from other manufacturers or that 

Philips does not specifically recommend. If you use such accessories or 

parts, your guarantee becomes invalid.

Do not expose the induction cooker to high temperatures, hot gas, 

steam or damp heat. Do not place the induction cooker on or near an 

operating or still hot stove or cooker.

Always switch off the appliance before you unplug it.

Always unplug the appliance and let it cool down before you clean it.

This appliance is intended for household use only. If the appliance is 

used improperly or for professional or semi-professional purposes or 

if it is not used according to the instructions in the user manual, the 

guarantee becomes invalid and Philips will not accept liability for any 

damage caused.

Place the induction cooker on a stable, horizontal and level surface 

and make sure there is at least 10cm free space around it to prevent 

overheating.

Do not place anything between the cookware and the cooking plate.

The maximum weight that can be put on the induction cooker is 7kg. 

Beware of hot steam that comes out of the cookware during cooking 

or when you remove the lid.

Do not lift and move the induction cooker while it is operating.

Never put empty cookware on the switched-on induction cooker, as 

this could cause the cookware to become distorted or the heating coil 

to become damaged.

Do not store flammable materials and liquids near or on the induction 

cooker.

Avoid hard contact between the cookware or other objects and the 

crystalite cooking plate.

Always place the cookware on the cooking zone during cooking.

Never connect this appliance to a timer switch or remote control 

system in order to avoid a hazardous situation.

Do not use cookware with a bottom diameter of more than 16cm to 

deep-fry food, as this causes the appliance to malfunction. 

The appliance is equipped with automatic shut-off. It switches off 

automatically in two situations:

In the Quick start (manual) mode and the Hot pot mode, the 

appliance switches off automatically if you do not press any button for 

60 minutes. 

If there is no cookware or unsuitable cookware on the cooking plate 

when you press the start button or if you remove cookware from 

the cooking plate during cooking, the cooker beeps continuously, 

the display freezes and shows a flashing ‘!’. The cooker automatically 

switches off after 1 minute unless you put the cookware back onto the 

cooking plate within this minute. 

This Philips appliance complies with all standards regarding electromagnetic 

fields (EMF). If handled properly and according to the instructions in this 

user manual, the appliance is safe to use based on scientific evidence 

available today.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-