Bunn FMD-5 User Manual

25

J4

J1

J2

J3

J4

J1

J2

J3

J4         J3

FIG. 13 CONTROL BOARD CONNECTORS

P2637

J1   J2

J1   J2

J4         J3

CONTROL BOARD #1

CONTROL BOARD #2

CONTROL BOARD (CONT.)
Removal and Replacement:

1.  Disconnect the three plugs on the main wiring har-

ness from the connectors on the control board.

2.  Remove the four #6-32 keps nuts securing the 

control board to the component bracket.

3.  Remove control board and discard.

4.   Install new control board on the component bracket 

using four #6-32 keps nuts.

5.  Reconnect the three plugs on the main harness to 

the connectors on the control board.

NOTE: J4 is not connected on Control Board #2 on 

120/208 - 240V dispensers.

42672 122209