Black & Decker SB3040 Instruction Manual

Page of 22
English
-4-
Intended use
Your Black & Decker stick blender has been 
designed for blending, mixing, beating, 
whipping, whisking and chopping food and 
beverage ingredients. Do not use this 
appliance for any other purpose. This 
product is intended for household use only.
Safety instructions
Warning! When using mains-powered 
appliances, basic safety precautions, 
including the following, should always be 
followed to reduce the risk of fire, electric 
shock, personal injury and material 
damage.
Read all of this manual carefully 
before using the appliance.
•  The intended use is described in this 
manual. The use of any accessory or 
attachment or the performance of any 
operation with this appliance other than 
those recommended in this instruction 
manual may present a risk of personal 
injury.
•  Retain this manual for future reference.
Using your appliance
•  Make sure that the appliance is switched 
off before connecting to or disconnecting 
from the power supply.
•  Always take care when using the 
appliance.
•  Do not use the appliance outdoors.
•  Always protect the motor unit from water 
or excessive humidity.
•  Do not operate the appliance if your 
hands are wet.
•  Do not operate the appliance if you are 
barefoot.
•  Do not touch moving parts. Keep long 
hair and loose clothing out of the way of 
the moving parts.
•  Guide the power supply cord neatly so it 
does not hang over the edge of a 
worktop and cannot be caught 
accidentally or tripped over.
•  Never pull the power supply cord to 
disconnect the plug from the socket. 
Keep the power supply cord away from 
heat, oil and sharp edges.
•  Switch off and wait for the motor to stop 
running before disconnecting the 
appliance from the power supply.
•  Never detach any part or accessory while 
the appliance is still connected to the 
power supply. Always disconnect the 
appliance from the power supply first.
•  If the power supply cord is damaged 
during use, disconnect the appliance 
from the power supply immediately. Do 
not touch the power supply cord before 
disconnecting from the power supply.
•  Disconnect the appliance from the power 
supply when not in use, before fitting or 
removing parts and before cleaning.