Bunn Single SH User Manual

Page 36

1. SMART FUNNEL not fully inserted
into the funnel rails.

2. Not using a SMART FUNNEL, and
the FUNNEL LOCKOUT function is
activated (on).

1.  Water  temperature  in  the  tank
does not meet the SET READY TEM-
PERATURE.

1.  Brew  funnel  was  not  removed
after  the  previous  brew  cycle  was
finished.

1.  Brew  funnel  was  moved  out  of
position  after  the  brew  cycle  was
started.

Position the funnel so that the sen-
sor  is  directly  beneath  the  sensor
coil on the brewer.

Disable the FUNNEL LOCKOUT func-
tion. See page 30 for procedure.

(a) Wait for the brewer to heat to the
proper temperature.

(b)  Disable  the  BREW  LOCKOUT
function.  See  page  10  for  proce-
dure.

Remove funnel, check contents, and
insert back into the funnel rails.

Press  BREW  to  start  a  brew  cycle
without removing the funnel.

To resume brewing, correctly posi-
tion  the  funnel  and  press  BREW
again.  The  brew  cycle  will  resume
from the point it was interrupted.

Press ON/OFF to terminate the cycle.