Bunn Single SH User Manual
Page 37
TROUBLESHOOTING (cont.)
Troubleshooting Procedure
Possible Cause
Screen Displayed
1. Soft Heat
®
Server was moved out
of position after the brew cycle was
started.
started.
1. ON/OFF switch was pressed after
the brew cycle was started.
the brew cycle was started.
1. Tank Heater failure
2. Triac Failure
3. Control Board/Thermistor failure
To resume brewing, correctly posi-
tion the Soft Heat Server and press
BREW again. The brew cycle re-
sumes from the point it was inter-
rupted.
tion the Soft Heat Server and press
BREW again. The brew cycle re-
sumes from the point it was inter-
rupted.
OR
Press ON/OFF to terminate the brew
cycle.
cycle.
To resume brewing, press BREW
again. The brew cycle resumes form
the point it was interrupted.
again. The brew cycle resumes form
the point it was interrupted.
OR
Press ON/OFF to terminate the brew
cycle.
cycle.
Service Required
Service Required
Service Required