Smeg ALFA135V6 User Manual

 

 

 

The oven is fitted with a safety device tripped in case of a serious 
malfunction. To reset the safety device, call the after-sales service. 

 

 

  

The manufacturer declines all responsibility for injury or damage 
caused by failure to comply with the above regulations or deriving from 
tampering with even just one part of the appliance. 

 

  

Level the oven by means of its four adjustable feet. To make the 
adjustment, undo the lock-nut and unscrew the foot. The adjuster screw 
travel is 10 mm. 

 

Connect the water inlet connection on the rear to a water supply outlet 
having  ¾ gas threaded connection, taking care to screw tightly to the 
hose.  
If the water supply pipe is new or has been unused for a long time, 
before making the connection turn the water on and allow it to flow out to 
ensure that it is clear and free from impurities. Otherwise, the water inlet 
may become fouled, damaging the oven. 
The oven must be supplied with water at a pressure between min. 
50 kPa and max. 500 kPa. 

 

The rear of the oven is fitted with a 
pipe which vents the steam produced 
during cooking. This pipe must be 
left free of all obstructions. Take 
care not to crush it.