Smeg ALFA135BE User Manual

Page of 15
 
Instructions for the User
 
 
 
 
The display shows U Ct
Press START to display the cooking time. 
Press START or keep it pressed to increase the cooking time (from 1 min. 
to 99 min.). 
Press STOP to complete the program editing procedure. 
The display shows UEnd. 
 
The parameters set are now saved in the chosen program. 
 
4.8  Manual cooking 
Use the knob to select the manual program (
). 
The special feature of this user-editable program is that the cooking 
parameters set are not retained in the memory when the knob is turned to 
any other position. 
This means that an "empty" program is always immediately available for 
quick, easy editing. 
 
4.8.1
 
How to use this program 
Use the knob to select the manual program  (
). 
The display shows the number of the program P10. 
Press  START or keep it pressed to increase the cooking temperature; 
each time START is pressed the temperature increments by 1°C (from 50° 
to 300°), or hold START down for increments of 5°C. 
Press STOP or keep it pressed to increase the cooking time from 1 min. to 
99 min. if you require a timed cooking operation, or set "InF" if an indefinite 
cooking time is required. 
Release STOP and preheating will start automatically after 5 seconds; the 
oven will preheat to the set cooking temperature. 
N.B. – When the cooking process is over, to repeat the same program do 
not turn the knob and press START again. 
27