Lucent Technologies 555-230-128 User Manual
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets
Installation and Test for Compact Modular Cabinets
555-230-128
Issue 3
May 1998
Install and Cable the Cabinets
Page 1-62
Install and Wire Telephones and Other Equipment
1
DS1 Tie Trunks Using T1 Channel Service Unit
Figure 1-30
shows a DS1 tie trunk connected to an external T1 Channel Service
Unit (CSU). A 120A2 enhanced Integrated Channel Service Unit (ICSU) can be
used in place of a T1 external CSU. The CSU or ICSU interfaces the DS1 tie
trunks with the 1.544 Mbps digital facility. Contact your Lucent Technologies
representative for maximum cabling distances.
used in place of a T1 external CSU. The CSU or ICSU interfaces the DS1 tie
trunks with the 1.544 Mbps digital facility. Contact your Lucent Technologies
representative for maximum cabling distances.
Figure 1-30.
Typical Connections to Channel Service Unit
Figure Notes
1. To DS1 tie trunk circuit pack
2. C6C cable (If distance is over 50
feet (15.24 m), use C6E cable.)
3. T1 external CSU or 120A2 ICSU
4. Tip (T)
5. Ring (R)
6. Tip 1(T1)
7. Ring1 (R1)
8. 1.544 Mbps T1 interface
9. To T1 carrier