Intel SE7501WV2 User Manual
Configuration Jumpers
Intel® Server Board SE7501WV2 TPS
Revision
1.0
Intel reference number C25653-001
158
9.2 External RJ45 Serial Port Jumper Block
The jumper block J5A2, located directly behind the external low profile RJ45 serial port, is used
to configure either a DSR or a DCD signal to the connector. See Section 3.3.2.3 for additional
information on serial port usage.
to configure either a DSR or a DCD signal to the connector. See Section 3.3.2.3 for additional
information on serial port usage.