Mitsubishi Electronics FX3G User Manual
64
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
Series
Programming Manual - Basic & Applied Instruction Edition
2 Overview (Sequence Program)
2.7 Types and Setting of Parameters
7
Setting the PLC system (1)
Click on the [PLC System(1)] tab to setup "Battery Less Mode", "Battery Mode", "MODEM Initialized", and
"RUN Terminal Input".
"RUN Terminal Input".
1) FX
3S
/FX
3U
/FX
3UC
PLC
2) FX
3G
/FX
3GC
PLCs
*1.
This area can be set only in FX
3U
/FX
3UC
PLCs.
*2.
This area can be set only in FX
3G
/FX
3GC
PLCs.
*3.
Up to the built-in input number of main unit.
Set item
Contents of setting
Setting range
Battery Less Mode
*1
Select this to operate the PLC without using the battery.
When a check mark is put here, the battery error indicator lamp is automatically
turned off and devices in the latched (battery backed) area are automatically
cleared.
When a check mark is put here, the battery error indicator lamp is automatically
turned off and devices in the latched (battery backed) area are automatically
cleared.
–
Battery Mode
*2
Select this item to operate the PLC with the battery.
–
MODEM Initialized
Set this item to automatically initialize a connected modem when the PLC power
is turned ON.
is turned ON.
–
RUN Terminal Input
Set this item to use an input terminal (X) to switch the PLC between STOP and
RUN.
RUN.
None
X000 to X017
*3