Mitsubishi Electronics FX3G User Manual
88
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
Series
Programming Manual - Basic & Applied Instruction Edition
4 Devices in Detail
4.1 Device Number List
High-speed counter
1-phase 1-counting input
Bi-directional (32 bits)
Bi-directional (32 bits)
C235 to C245
8 points maximum can be used among C235 to C255 [latched
(battery backed) type].
The setting can be changed between the latched (battery
backed) type and the non-latch type using parameters.
−2,147,483,648 to +2,147,483,647 counts
Hardware counter
(battery backed) type].
The setting can be changed between the latched (battery
backed) type and the non-latch type using parameters.
−2,147,483,648 to +2,147,483,647 counts
Hardware counter
*1
1 phase: 100 kHz
× 6 points, 10 kHz × 2 points
2 phases: 50 kHz (1 edge count),
50 kHz (4 edge count)
Software counter
1 phase: 40 kHz
2 phases: 40 kHz (1 edge count),
10 kHz (4 edge count)
50 kHz (4 edge count)
Software counter
1 phase: 40 kHz
2 phases: 40 kHz (1 edge count),
10 kHz (4 edge count)
Section 4.8
1-phase 2-counting input
Bi-directional (32 bits)
Bi-directional (32 bits)
C246 to C250
2-phase 2-counting input
Bi-directional (32 bits)
Bi-directional (32 bits)
C251 to C255
Data register (32 bits when used in pair form)
General type (16 bits)
[variable]
[variable]
D0 to D199
200 points
The setting can be changed between the latched
(battery backed) type and the non-latched type
using parameters.
(battery backed) type and the non-latched type
using parameters.
Section 4.9
latched (battery backed)
type (16 bits)
[variable]
type (16 bits)
[variable]
D200 to D511
312 points
latched (battery backed)
type (16 bits)
[fixed] <file register>
type (16 bits)
[fixed] <file register>
D512 to D7999
<D1000 to
D7999>
<D1000 to
D7999>
7488 points
<7000
points>
<7000
points>
Among the 7488 fixed latched (battery backed)
type data registers, D1000 and later can be set as
file registers in units of 500 points.
type data registers, D1000 and later can be set as
file registers in units of 500 points.
Special type (16 bits)
*2
D8000 to D8511
512 points
Chapter 37
Index type (16 bits)
V0 to V7, Z0 to Z7
16 points
Section 4.11
Extension register/Extension file register
Extension register
(16 bits)
(16 bits)
R0 to R32767
32768 points latched (battery backed)
Section 4.10
Extension file register
(16 bits)
(16 bits)
ER0 to ER32767
32768 points
Available only while a memory cassette is
mounted
mounted
Pointer
For jump and branch call
P0 to P4095
4096 points
For CJ and CALL instructions
Section 4.12
Input interrupt
Input delay interrupt
Input delay interrupt
I0
to I5
6 points
Timer interrupt
I6
to I8
3 points
Counter interrupt
I010 to I060
6 points
For HSCS instruction
Nesting
For master control
N0 to N7
8 points
For MC instruction
Constant
Decimal (K)
16 bits
−32768 to +32767
Chapter 5
32 bits
−2,147,483,648 to +2,147,483,647
Hexadecimal (H)
16 bits
0 to FFFF
32 bits
0 to FFFFFFFF
Real number (E)
32 bits
−1.0 × 2
128
to
−1.0 × 2
−126
, 0, 1.0
× 2
−126
to 1.0
× 2
128
Both the decimal point expression and the exponent expression
are available.
are available.
Character string (" ")
Character string
Specify characters by quotation marks.
In a constant of an instruction, up to 32 half-width characters are
available.
In a constant of an instruction, up to 32 half-width characters are
available.
*1.
When the FX
3U
-4HSX-ADP is connected to an FX
3U
PLC, the maximum input frequency is set as follows:
1 phase: 200 kHz
2 phases: 100 kHz (1 edge count). 100 kHz (4 edge count)
2 phases: 100 kHz (1 edge count). 100 kHz (4 edge count)
*2.
For supported functions, refer to Chapter 37.
For handling of the latched (battery backed) area, refer to Section 2.6.
For handling of the latched (battery backed) area, refer to Section 2.6.
Device name
Description
Reference