A&D HV-G Series User Manual
HV-G Instruction Manual Page 56
17 Options
17.1 RS-232C / Relay output / Buzzer (OP-03)
Replacing RS-232C interface with this option, refer to “ RS-232C Serial Interface” for its
specification.
specification.
The following option cables can be used, when you do not use the relay output.
AX-KO557A,
AX-KO1786-200
Pin connections
Mating connector
DIN 8pin, JA:TCS0586 (of accessory pack)
Circuit
Relay
Solid-state-relay
Maximum voltage
DC50V
Maximum current
DC100mA
Maximum ON resistance 8
Ω
Pin No. Signal name
Direction
Description
1
HI
Output
Relay output of HI
2
RXD
Input
Receive data
3
TXD
Output
Transmit data
4
LO
Output
Relay output of LO
5
SG
-
Signal ground (RS-232C)
6
OK
Output
Relay output of OK
7
DSR
Output
Data set ready
8
COM
-
Relay common terminal
Installing OP-03
Step 1
Remove two screws that
attach the RS232C board on
the rear of the display unit.
Remove the RS232C board.
attach the RS232C board on
the rear of the display unit.
Remove the RS232C board.
Step 2
Switch the connections.
Step 3
Insert the option board into the
display unit and afix with
screws
display unit and afix with
screws