A&D HV-G Series User Manual
HV-G Instruction Manual Page 58
Circuit
Caution
Please confirm that the AC adaptor type is correct for your local voltage
and receptacle type.
and receptacle type.
Selection switch for the RS-422/ RS-485 interface
Selects either of RS-422 or RS-485 interface using a switch on the board.
Installing OP-04
Step 1
Remove two screws that
attach the RS232C board on
the rear of the display unit.
Remove the RS232C board.
attach the RS232C board on
the rear of the display unit.
Remove the RS232C board.
Step 2
Switch the connections.
Step 3
Insert the option board into the
display unit and afix with the
screws
display unit and afix with the
screws