Smeg SC709X User Manual

Remove all the accessories from the oven and carry out the following
operations:

1

Remove the side racks (fig.1);

2

Slide out the side panels “F” and “G” (fig. 2);

3

Extract the rear panel “A” after first unscrewing the threaded rings
“C” (fig. 2);

4

Reassemble the panels by returning them to their original
conditions.

1)

             2)

With the door completely open, lift the levers A until they touch the
hinges  B and take hold of the two sides of the door with both hands
close to the hinges. Raise the door to an angle of about 45° and remove
it. If the hinges have not locked, repeat the operation, raising the levers
A and keeping the door slightly raised. To reassemble, fit the hinges B
into their grooves, then lower the door into place, ensuring that it
remains fitted into the grooves C, then lower the levers A.