Lexmark C772 Installation Guide
Scanner option setup
15
4
Scanner option setup
This chapter includes information on setting up the MFP (scanner).
To assemble this option, you should have the following components:
The setup for this portion of the book covers:
1
Positioning the scanner
2
Installing memory options
3
Installing the printer
Positioning the scanner
1
Remove the scanner base from the carton.
2
Place the scanner base on a table, scanner cabinet, or other flat surface.
3
Align the hinges on the scanner top with the slots in the scanner, and then lower the scanner top onto the scanner.
For information on removing the scanner top, see “
Removing the scanner top” in the User’s Guide located on
the Software and Documentation CD.
4
Connect the two scanner cables.
Note: To prevent errors and scanner malfunction, make sure the scanner cable thumbscrews are tightened
securely.
5
Removing the print cartridge packaging on page 16, and follow the printer setup instructions. For
information on installing the interface card and memory and firmware cards, go to
•
Printer
•
4600 MFP option (scanner)
•
Printer memory or option cards