Lexmark 2300 User Manual

To prevent jams and misfeeds: 

Place the All-In-One on a flat, level surface.

Use paper recommended for an inkjet All-In-One.

Do not force the paper into the All-In-One.

Paper jam in the paper 
support

1 Firmly grasp the paper, and gently pull it out.

2 Press the 

 button to reset the All-In-One.

Paper jam inside the 
All-In-One

1 Lift the scanner unit.

2 Snap the scanner support into position to hold up 

the scanner unit.

3 Firmly grasp the paper, and gently pull it out.

4 While lifting the scanner unit, press the scanner 

support back until it slides into the slot, and close 
the scanner unit.

5 Press the 

 button to reset the All-In-One.

Paper or specialty media:

• misfeeds or skews
• multiple sheets feed or 

stick together

Load a smaller amount of paper into the All-In-One. 

See “Loading paper into the paper support” on 
page 27

for information about:

• Maximum loading amounts for each paper type
• Paper exit tray capacity
• Specific loading instructions for supported 

paper and specialty media

Load paper with the print side facing you.

Remove each page as it exits the All-In-One, and let it 
dry completely before stacking.

Use only new, unwrinkled paper.