Lexmark 2300 Manual Do Utilizador
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
65
Jams and misfeeds troubleshooting
To prevent jams and misfeeds:
•
Place the All-In-One on a flat, level surface.
•
Use paper recommended for an inkjet All-In-One.
•
Do not force the paper into the All-In-One.
Symptom
Solution
Paper jam in the paper
support
support
1 Firmly grasp the paper, and gently pull it out.
2 Press the
button to reset the All-In-One.
Paper jam inside the
All-In-One
All-In-One
1 Lift the scanner unit.
2 Snap the scanner support into position to hold up
the scanner unit.
3 Firmly grasp the paper, and gently pull it out.
4 While lifting the scanner unit, press the scanner
support back until it slides into the slot, and close
the scanner unit.
the scanner unit.
5 Press the
button to reset the All-In-One.
Paper or specialty media:
• misfeeds or skews
• multiple sheets feed or
• multiple sheets feed or
stick together
Load a smaller amount of paper into the All-In-One.
for information about:
• Maximum loading amounts for each paper type
• Paper exit tray capacity
• Specific loading instructions for supported
• Paper exit tray capacity
• Specific loading instructions for supported
paper and specialty media
Load paper with the print side facing you.
Remove each page as it exits the All-In-One, and let it
dry completely before stacking.
dry completely before stacking.
Use only new, unwrinkled paper.