Toshiba A10 User Manual

196

Select the item you wish to remove and click OK.

Remove the device when told it is safe to do so.

Never swap modules when the computer is in Hibernation or Sleep 
mode. This is known as “warm swapping” and is not supported. For 
more information on Hibernation and Sleep modes see 

.

The system does not recognize your PC Card.

Refer to the PC Card documentation.

Removing a malfunctioning card and reinstalling it can correct 
many problems. 

Reinsert the card to make sure it is properly connected.

If the card is attached to an external device, check that the 
connection is secure.

Refer to the card’s documentation, which should contain a 
troubleshooting section.

This section lists some of the most common printer problems.

Check that the printer is connected to a working power outlet, 
turned on and ready (on line).

Check that the printer has plenty of paper. Some printers will not 
start printing when there are just two or three sheets of paper left in 
the tray.

Make sure the printer cable is firmly attached to the computer and 
the printer.

Run the printer’s self-test to check for any problem with the printer 
itself.

Make sure you installed the proper printer drivers as shown in 

 or in the instructions that came 

with the printer.