Toshiba A10 User Manual

197

You may have connected the printer while the computer is on. 
Disable Sleep mode, turn off the computer, and turn off the printer. 
Turn the printer back on, make sure it is online, and then turn the 
computer back on.

Try printing another file. For example, you could create and attempt 
to print a short test file using Notepad. If a Notepad file prints 
correctly, the problem may be in your original file.

If you cannot resolve the problem, contact the printer’s 
manufacturer.

Many programs display information on the screen differently from 
the way they print it. See if your program has a print preview mode. 
This mode lets you see your work exactly as it will print. Contact 
the software manufacturer for more information.

This section lists common modem problems.

Make sure the cable from the modem to the telephone line is firmly 
connected to the computer’s modem port and the telephone line 
jack.

Check the communications parameters (baud rate, parity, data 
length and stop bits) specified in the communications program. It 
should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400, 
28800, 33600 bps (bits per second) or higher. Refer to the 
program’s documentation and the modem manual for information 
on how to change these settings.

Make sure the line has a dial tone. Connect a telephone handset to 
the line to check this.

The other system may be busy or off line. Try making a test 
transmission to someone else.

For more information regarding your system’s V.92 modem, visit 
the Toshiba Web site at 

.