ASKProxima m9 User Guide

Page of 24
7
Getting Ready
En
gl
is
h
Getting Ready
Locate the projector on a desk, table, or stand that is firm and level. Make sure to allow 
sufficient space around the sides and back of the projector for proper ventilation.
z The following illustrations show how the projector should be oriented for optimum projection 
relative to the screen.
z You can place the projector on a surface that is angled up to 30 degrees upwards or 
downwards during use. Never locate the projector on a surface that is angled more than 30 
degrees, or angled at all to the left or right. Such conditions can cause the lamp to 
explode or can shorten lamp life, and also creates the risk of malfunction.
z The projector’s auto keystone correction range is 0 to +30 degrees. If the surface you are 
projecting onto is angled downwards from horizontal, use manual keystone correction (page 
14) to correct the image.
z Note that the distances provided above are for reference only.
Interactive screen size and distance calculator 
www.askproxima.com/calculator
Setting Up the Projector
Screen Size and Distance
Diagonal Screen Size
Approximate Projection Distance
Inches
cm
Minimum 
Distance (m)
Maximum 
Distance (m)
Minimum 
Distance (feet)
Maximum 
Distance (feet)
40
102
1.1
2.2
3.61
7.22
60
152
1.7
3.4
5.58
11.15
80
203
2.3
4.5
7.55
14.76
100
254
2.8
5.6
9.19
18.37
150
381
4.3
8.5
14.11
27.89
200
508
5.7
11.3
18.70
37.07
Viewed from Above
Viewed from the Side
The center of the 
projector’s lens 
should be aligned 
with the horizontal 
center of the screen.
Make sure the 
projector is at a 
right angle to the 
screen.
Screen
Screen
ASK M9_UG_E.book  Page 7  Tuesday, October 23, 2007  5:32 PM