ASKProxima a6 compact User Guide
USER GUIDE
XGA LCD PROJECTOR
13
6 MAKING THE CONNECTIONS
The projector may be connected to different equipment. The following
sections describe in detail how to connect to these systems.
sections describe in detail how to connect to these systems.
See the illustration on the rear of the quick set-up card on
how the various system parts connect together.
how the various system parts connect together.
Be aware of static electricity that may build up in the dry
season and when operating on synthetic carpets. Discharge
any static electricity by touching a metallic surface before
you start.
season and when operating on synthetic carpets. Discharge
any static electricity by touching a metallic surface before
you start.
Place the projector on a table at a suitable distance to the projection screen.
Select a screen with good reflectivity and avoid direct sunlight shining in.
Place the projector so that the image is visible to the whole audience, and
so that the unit does not obstruct the view.
Select a screen with good reflectivity and avoid direct sunlight shining in.
Place the projector so that the image is visible to the whole audience, and
so that the unit does not obstruct the view.
Various cables are supplied or optionally available to connect to different
sources. Follow the list below in numerical order for a trouble-free set-up!
sources. Follow the list below in numerical order for a trouble-free set-up!
1. SWITCH OFF all equipment before making all the connections.
2. COMPUTER GRAPHICS ADAPTER.
Computer graphics adapters use different connectors depending on the
actual computer system in use. Adapters are used at the computer end
for non-VGA type connections
actual computer system in use. Adapters are used at the computer end
for non-VGA type connections
•
PC. Use the computer cable directly to connect to the graphics port.
If needed, connect your monitor to the MONITOR connector on the
projector.
projector.
•
MAC. Connect the optional MAC adapter marked COMPUTER on
the computer end to adapt to the graphics-port. The optional
adapater marked MONITOR is connected to the monitor cable if
needed.
adapater marked MONITOR is connected to the monitor cable if
needed.
•
WORKSTATION. Connect the optional 13W3 or BNC adapter
marked COMPUTER on the computer end to adapt to the graphics-
port. The optional 13W3 or BNC adapter marked MONITOR is
connected to the monitor cable if needed.
port. The optional 13W3 or BNC adapter marked MONITOR is
connected to the monitor cable if needed.