ASKProxima a6 compact User Guide
USER GUIDE
XGA LCD PROJECTOR
14
3. SOUND.
Connect sound using an optional 3.5 mm stereo cable.
4. MOUSE.
You may control the mouse directly from the wireless remote control.
•
PS/2. The cable connects directly, without the use of an adapter.
Running the computer mouse in parallel is not possible, unless your
computer itself has provision for two mice simultaneously. You may
consider using the serial (RS232) adapter and run your mouse on
the serial port instead, in order to be able to run your local mouse in
parallel. This will require a different mouse driver setting. Please
consult your computer documentation or local dealer for details.
computer itself has provision for two mice simultaneously. You may
consider using the serial (RS232) adapter and run your mouse on
the serial port instead, in order to be able to run your local mouse in
parallel. This will require a different mouse driver setting. Please
consult your computer documentation or local dealer for details.
•
SERIAL (RS 232). Use the optional cable and serial adapter with a
branch for the local computer mouse. The serial adapter is fitted with
a 9-pin DSUB connector. Use an extra 9 to 25 pin adapter (available
from your dealer) if your computer has a 25 pin serial connector.
Connect your computer mouse to the free branch of the adapter if
desired. With some computers, the branched adapter may not work.
For this purpose, an optional straight serial adapter is available.
a 9-pin DSUB connector. Use an extra 9 to 25 pin adapter (available
from your dealer) if your computer has a 25 pin serial connector.
Connect your computer mouse to the free branch of the adapter if
desired. With some computers, the branched adapter may not work.
For this purpose, an optional straight serial adapter is available.
•
MAC. Use the optional cable and MAC mouse adapter to connect to
the mouse port on your MAC computer.
5. VIDEO. *
The video version connects directly to standard RCA (phono) connectors
for sound and video. You may use a SCART adapter at the source end if
needed.
for sound and video. You may use a SCART adapter at the source end if
needed.
6. MAINS POWER.
Connect the mains cord to the projector and all other equipment in the
set-up.
set-up.
7. SWITCH ON the projector first, then the computer. It is important to
switch the projector on first in order for correct detection of the projector
as a display and mouse peripheral device to the computer.
as a display and mouse peripheral device to the computer.