Sony ht-ddw1500 User Guide
15
GB
C:\Documents and
Settings\pc13\Desktop\JC060815_2662266612DDW1500_GBES\2662266612\01GB03CON_HT-
DDW1500-AR.fm
Settings\pc13\Desktop\JC060815_2662266612DDW1500_GBES\2662266612\01GB03CON_HT-
DDW1500-AR.fm
masterpage: Right
HT-DDW1500
2-662-266-61 (2)
Gettin
g
Sta
rted
You can install your surround and surround
back speakers on the wall.
back speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the metal
hook on the back of each
speaker as shown in the
illustrations below.
that are suitable for the metal
hook on the back of each
speaker as shown in the
illustrations below.
2
Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
The screws should protrude 5
to 7 mm.
3
Hang the speakers on the
screws.
screws.
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
strength or improper screw installation, natural
calamity, etc.
Installing the speakers on the
wall
wall
more than 4 mm
more than 25 mm
Metal hook on the back of the speaker
4.6 mm
10 mm
5 to 7 mm
+
–
4.6 mm
10 mm
Metal hook on the back of the speaker
01GB01COV_HT-DDW1500-AR.book Page 15 Tuesday, May 23, 2006 6:27 PM