Amana mvwc300v Installation Instruction

When washer is level, hold the leveling foot to keep it from 

turning and use a 9/16” or 14 mm open-end or adjustable 

wrench to tighten jam nut (A) counterclockwise on foot 

securely against washer cabinet. 

You may want to prop washer again with 

wooden block, then make sure to recheck for levelness.

q

  Check electrical requirements. Be sure you have correct  

electrical supply and recommended grounding method.

q

  Check that all parts are now installed. If there is an extra      

part, go back through steps to see what was skipped.

q

  Check that you have all of your tools.

q

  Check that yellow shipping materials were completely  

removed from back of washer.

q

  Check that both water faucets are on.

q

  Check for leaks around faucets and inlet hoses.

q

  Remove film from console and any tape remaining  

on washer.

q

  Check that washer is plugged into a grounded  

3 prong outlet.

q

  Dispose of/recycle all packaging materials.

q

  Read “Washer Use” in your Washer User Instructions.

q

  To test and clean your washer, measure 1/2 of normal  

recommended amount of powdered or liquid detergent  

and pour it into washer basket or detergent dispenser  

(on some models). Close lid. Select any cycle. Start washer 

and allow to complete full cycle.