Maytag mvwc300v User Guide

Style 1: With liquid fabric softener dispenser (on some models)

■

Use only liquid fabric softener in this dispenser. Pour 

measured liquid fabric softener into the dispenser. Softener is 

added automatically during the rinse portion of the cycle. 

Dilute liquid fabric softener by filling the dispenser with 

warm water until liquid reaches the underside of the rim. See 

max fill line arrows.  

Style 2: Without liquid fabric softener dispenser (on some 

models)

■

In the final rinse only, add fabric softener that has been 

diluted with ½ to 1 cup (125 to 250 mL) warm water. 

5. Close the washer lid. Washer will not agitate or spin with the lid 

open.

6. Turn the LOAD SIZE or WATER LEVEL selector to the correct 

setting for your wash load and the type of fabric being washed. 

■

You may change the load size or water level selection after 

the washer has started filling by turning the selector to a 

different setting.

■

On models with a variable Load Size or Water Level control, 

you should turn the knob to RESET, then to desired setting.

7. Select a Wash Temperature based on the type of fabric and soil 

being washed. Use the warmest wash water safe for the fabric. 

Follow garment label instructions. 
The Automatic Temperature Control (ATC) (on some models) 

electronically senses and maintains a uniform water temperature 

by regulating incoming hot and cold water.

■

Even in Cool wash, some warm water is let into the washer 

to maintain a minimum temperature of approximately 70ºF 

(21ºC). 

Whites and pastels
Durable garments
Heavy soils

Bright colors
Moderate to light soils

Colors that bleed or fade
Light soils

Dark colors that bleed or fade
Light soils

NOTE: In wash water temperatures colder than 60°F (15.6°C), 

detergents do not dissolve well. Soils can be difficult to remove. 

Some fabrics can retain wear wrinkles and have increased pilling 

(the formation of small lint-like balls on the surface of garments).

8. You can customize your wash by adding rinse Options to your 

cycle selections. This knob has settings for:

■

Extra Rinse - Selecting this option provides a second rinse. 

An Extra Rinse can be added to any wash cycle.

■

Cycle Signal - A tone will sound at the end of the cycle. The 

sound level cannot be adjusted.

■

Extra Rinse & Cycle Signal - This option combines both a 

Extra Rinse and a Cycle Signal at the end of the wash cycle.

9. The Sensi-Care™ System (on some models) is an integrated set of 

controls which work together to provide optimal wash 

temperatures, agitation times, and agitation/spin speeds based 

on the Fabric Select setting. The controls provide higher wash 

temperatures for more aggressive, heavy-duty cycles and slightly 
lower temperatures on cycles for delicate and hand wash items, 

to provide better fabric care. The timer knob allows you to 

decrease agitation time for light soils and increase agitation time 

for heavy soils.

10. Push in the Timer knob and turn it clockwise to the wash cycle 

you want. Reduce the wash time when using a small water level 
setting. Pull out the Timer knob to start the washer. 

■

To stop the washer at any time, push in the Timer knob. 

■

To restart the washer, close the lid (if open) and pull out the 

Timer knob.

Use a soft, damp cloth or sponge to wipe up any spills such as 
detergent or bleach from the outside of your washer.
Clean your washer interior by mixing 1 cup (250 mL) of chlorine 
bleach and enough detergent to equal twice the manufacturer’s 
recommended amount for a normal wash load. Pour this mixture 
into your washer and run it through a complete cycle using hot 
water. Repeat this process if necessary.
Remove any hard water deposits using only cleaners labeled as 
washer safe.
Cleaning the liquid fabric softener dispenser (on some models):
1. Remove dispenser by grasping top with both hands and 

squeezing, while pushing upward with thumbs.

2. Rinse dispenser under warm water, then replace it.
NOTE: Some models are equipped with a liquid fabric softener 
dispenser. To avoid damage to the washer or clothing, do not wash 
clothes with the liquid fabric softener dispenser removed or add 
detergent or bleach to this dispenser; it is for liquid fabric softener 
only.

This washer does not include water inlet hoses. A list of hoses 
available for separate purchase from Whirlpool Corporation is 
provided on the first page of this user instructions. 
Replace water inlet hoses after 5 years of use to reduce the risk of 
hose failure. Periodically inspect and replace water inlet hoses if 
bulges, kinks, cuts, wear, or leaks are found.
When replacing your water inlet hoses, mark the date of 
replacement on the label with a permanent marker.