KitchenAid KSCS25MVMS Installation Instruction

■

Observe all governing codes and ordinances.

■

Installer: Leave Installation Instructions with homeowner.

■

Homeowner: Keep Installation Instructions for future reference 
and for the local electrical inspector’s use.

■

Keep cardboard shipping piece or plywood under refrigerator 
until it is installed in the operating position.

■

Comply with installation specifications and dimensions.

■

Remove any moldings or decorative panels from kitchen 
cabinets that prevent the refrigerator from being serviced.

■

Contact a qualified electrical installer.

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.

■

Your refrigerator dealer has a kit available with a 

¹⁄₄" (6.35 mm) 

saddle-type shutoff valve, a union, and copper tubing.

■

Or you can purchase a 

¹⁄₄" (6.35 mm) copper tubing with 

shutoff valve and a 

¹⁄₄" (6.35 mm) compression fitting 

(coupling).

■

Depending on water line connections, you may also need a 

¹⁄₄" 

(6.35 mm) nut and 

¹⁄₄" (6.35 mm) ferrule.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

■

Hand drill or electric drill 
(properly grounded)

■

¹⁄₄" nut driver and drill bit

■

Flat-blade screwdriver

■

⁵⁄₁₆" or adjustable wrench

■

⁷⁄₁₆" and ¹⁄₂" open-end 

wrenches

■

Two adjustable 
wrenches

■

³⁄₈" and ¹⁄₂" socket 

wrenches

A