Konica Minolta mc1690mf User Guide
Specifying Settings in Utility Menu
2-30
Specifying Settings in Utility Menu
General Procedure for Specifying Settings in Utility
Menu
1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select the desired menu, and then press the
Select key to display the selected menu.
Select key to display the selected menu.
"
Refer to the menu configuration on page 2-9 to display the desired
menu.
menu.
3
To select a setting, press the +, ,, * or ) key.
To enter a setting, use the keypad to type in the number.
To enter a setting, use the keypad to type in the number.
4
Press the Select key.
The setting is applied.
The setting is applied.
"
To cancel the settings, press the Back key.
Memory Reception
Received faxes can be stored in the memory and printed at a specified time.
This is convenient, for example, when confidential documents are received.
Memory reception can be used with the following settings.
This is convenient, for example, when confidential documents are received.
Memory reception can be used with the following settings.
Start/end time settings: Not set
MEMORY RX MODE function is normally set to
MEMORY RX MODE function is normally set to
ON
. To print a fax saved
in memory, set MEMORY RX MODE function to
OFF
.
Start/end time settings: Set
Memory reception mode begins and ends at the specified time.
Example 1: When ON TIME setting is set to 18:00 and OFF TIME setting
is set to 8:00
Memory reception mode begins and ends at the specified time.
Example 1: When ON TIME setting is set to 18:00 and OFF TIME setting
is set to 8:00
The machine is in memory reception mode from 18:00 to 8:00 and in
normal reception mode, where faxes are printed after being received,
from 8:00 to 18:00.
normal reception mode, where faxes are printed after being received,
from 8:00 to 18:00.
Example 2: When ON TIME setting is set to 12:00 and OFF TIME setting
is set to 12:00 (the start time and end time are the same)
is set to 12:00 (the start time and end time are the same)
MEMORY RX MODE function is normally set to
ON
; however, faxes
saved in memory are printed at 12:00.