Konica Minolta mc1690mf User Guide
Basic Fax Operation
3-2
Basic Fax Operation
This section contains basic information of fax transmission.
"
Documents with the following paper sizes can be faxed.
Original size: A5/A4/Statement/Letter (when using the original glass)
Width: 140 to 216 mm
Length: 148 to 500 mm (when using the ADF)
Original size: A5/A4/Statement/Letter (when using the original glass)
Width: 140 to 216 mm
Length: 148 to 500 mm (when using the ADF)
Sending a Fax Using the ADF
If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
matically scanned.
"
Do not load original documents that are bound together, for example,
with paper clips or staples.
with paper clips or staples.
"
Do not load more than 35 sheets; otherwise an original document mis-
feed or damage to the document or machine may occur.
feed or damage to the document or machine may occur.
"
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
straight, or an original document misfeed or damage to the document
may occur.
"
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
being scanned.
1
Press the Fax key to enter Fax mode.
"
If the initial mode (
UTILITY
-
MACHINE SETTING
-
INITIAL MODE
)
is set to
FAX
, this step can be skipped.
2
Make sure that there is no document on the original glass.
3
Put the document into the ADF
document feed tray face up.
document feed tray face up.
4
Adjust the document guides to the document size.