Hitachi dz-mv200a Owner's Manual

English

Use the AV input/output cable (provided) to connect the DVD video camera/recorder to other AV de-
vice as follows:

Note: If you operate the DVD video camera/re-
corder connected to another device, always
power the camera/recorder from AC outlet using
the AC adapter.
Note: In case of camera recording with this DVD
video camera/recorder, do not connect the AV
input/output cable to the output jacks of any other
device: If you do this, sound from the other de-
vice may leak to this DVD video camera/recorder.

Note: If you use a Hitachi VCR, it will be operated
by the remote control provided with the DVD video
camera/recorder. When recording an image from
a Hitachi VCR, change the remote control code
of the VCR to other than “VCR2”.
Note: If you increase the volume of speaker in this
DVD video camera/recorder when recording an
externally input image, noise may occur in the
image that is being recorded. To prevent this, re-
duce the speaker volume when recording an ex-
ternally input image.

You can transfer any image recorded on videotape, etc. to the DVD video camera/recorder via the
AV input/output jack, and record it on disc.

VIDEO

AUDIO

L

R