Haier xqb50-20 User Manual

1.Do not take off the water absorption 
   cushion. Please check if the cushion
   is dropped or damaged before each 
   usage. If it happens please contact 

our after-sale department immediately.

2.Put the nut of the water inlet hose on

the valve jointer.

3.Fasten the nut. Swing it gently to 
   confirm if it's suitable.

1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then 
   pull of the water inlet hose. If the machine is used 
   more than once every week, the jointer of the water 
   inlet hose can be kept on the faucet to prevent 
   damaging the fixing screw.

1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if 
   the connection between the jointer 
   of the water inlet hose and the water
   faucet, and the installation of the 
   water inlet hose are firm, so as to 
   prevent dropping from improper 
   Installation position.

1.Push down the slider. Insert the 
   water inlet hose into the jointer.
2.Hang the lock lever to the jointer. 
   Release the slider till a click 
   sound is heard.

Locking lever

Slider

Water absorption cushion

Nut of the water inlet hose

Jointer of the water inlet valve

Slider

Jointer of the water 
inlet hose

Locking lever

Connection between the water inlet hose and the

washing machine

Connection between the jointer of the water inlet

hose and the water inlet hose

Check the connection between the jointer of the

water inlet hose and the water faucet

Dismantle the water inlet hose

6