SATO MB410i User Guide
Unit 7: Troubleshooting
Page 7-4
PN 9001190C
MB400i/MB410i Operator Manual
* Contact your nearest dealer or SATO representative for support
WARNING: Never connect or disconnect interface cables (or use a switch box) with power applied to either
the printer or the host. This may cause damage to the interface circuitry and the damage is not covered by
warranty.
the printer or the host. This may cause damage to the interface circuitry and the damage is not covered by
warranty.
Blink (green-
>off->red->off)
every 1s
>off->red->off)
every 1s
All modes
Head overheat
protection
feature
protection
feature
When print head
is hotter than
158 degrees F
(70 degrees C),
the print head
overheat
protection
feature is
activated. Not in
error.
is hotter than
158 degrees F
(70 degrees C),
the print head
overheat
protection
feature is
activated. Not in
error.
Cleared when the
head temperature
drops to 122
degrees F (50
degrees C).
head temperature
drops to 122
degrees F (50
degrees C).
STATUS LED
MODE
DESCRIPTION
CAUSE
REMEDY