IBM 560x User Guide
Installing the ThinkPad Features Program for DOS 7.0
Installing DOS 7.0
Follow the instructions in the operating-system documentation. If you
also are installing Microsoft Windows 3.11, go to “Installing Windows
3.11” on page 120. Otherwise, if you want to continue to install all
device drivers, continue with “Installing the ThinkPad Features
Program for DOS 7.0.”
also are installing Microsoft Windows 3.11, go to “Installing Windows
3.11” on page 120. Otherwise, if you want to continue to install all
device drivers, continue with “Installing the ThinkPad Features
Program for DOS 7.0.”
Installing the ThinkPad Features Program for DOS 7.0
Note:
When installing an operating system,
you need to install the ThinkPad
Features program.
When installing an operating system,
you need to install the ThinkPad
Features program.
To install the ThinkPad Features program:
1
Start DOS.
2
Insert the Utility Diskette 1 into the diskette drive.
3
Type
A:UINSTALL
at the DOS prompt and press Enter.
The following screen appears:
Type the SOURCE drive letter (A-Z). When you install a program, the
SOURCE drive letter is the location you are installing FROM.
SOURCE drive letter is the location you are installing FROM.
Source Drive ...
Enter F1=Help F3=Exit
Installation Options
Installation Source Drive
4
Press Enter.
5
Select Install DOS ThinkPad Features at the
Installation Options screen; then follow the instructions
on the screen.
Installation Options screen; then follow the instructions
on the screen.
You have completed the installation of the ThinkPad Features
program.
program.
If you want to continue to install all device drivers, continue with the
PC Card Director.
PC Card Director.
116
IBM ThinkPad 560 User's Guide