IBM 560x User Guide
Installing the PC Card Director for DOS 7.0
Installing the PC Card Director for DOS 7.0
PC Card Director:
Page 48.
Note:
Do not install the Phoenix PCMCIA
support in IBM PC DOS 7.0.
Do not install the Phoenix PCMCIA
support in IBM PC DOS 7.0.
When installing DOS, you need to install the following software to
use the PC Cards:
use the PC Cards:
PC Card device drivers:
– Card Services device driver
– Socket Services device driver
– Resource Map Utility device driver
– PC Card Power Management device driver
– PC Card Director utility
– Socket Services device driver
– Resource Map Utility device driver
– PC Card Power Management device driver
– PC Card Director utility
Note:
The PC Card client device driver is
not part of the preinstalled software.
Refer to the manual that came with
the PC Card to install the device
driver.
The PC Card client device driver is
not part of the preinstalled software.
Refer to the manual that came with
the PC Card to install the device
driver.
PC Card client device drivers (only when PC Card Director does
not support the PC Card)
To install the PC Card Director:
1
Start DOS.
2
Insert the PCMCIA Installation Diskette for
DOS/Windows into the diskette drive.
DOS/Windows into the diskette drive.
3
Type
A:
at the DOS command prompt and press Enter
to go to the A: prompt.
4
Type
PCMINSTD
; then press Enter.
5
Follow the instructions on the screen.
Default choices are already highlighted at the Selector
screens.
screens.
Note:
Whenever you update the
CONFIG.SYS file, see page 195.
Whenever you update the
CONFIG.SYS file, see page 195.
6
After the installation is complete, remove any diskette
from the diskette drive and restart the computer.
from the diskette drive and restart the computer.
You have completed the installation of the PC Card Director for
DOS.
DOS.
Chapter 7. Installing Software
117