Buffalo wbr2-g54s Quick Setup Guide

1.  Power down the Cable or DSL modem and the computer which will be 

used to confi gure the AirStation router.

2.  Plug the Cable or DSL’s LAN Ethernet cable into the AirStation’s WAN 

port.  Initially, you may need to unplug this cable from your computer, 
hub or other router.

3. Plug the provided Ethernet cable into a LAN port on the AirStation and 

plug the other end into your computer’s Ethernet adapter’s (NIC) 
port.  If you plan to initially confi gure the AirStation wirelessly (not 
recommended), you may skip this step.

4. Power on your cable or DSL modem and wait one full minute, then 

power on the AirStation router and wait one full minute, and fi nally 
power on the computer which will be used to confi gure the AirStation.  
If the red DIAG light on the AirStation is lit or fl ashing after several 
minutes of being powered on, please consult Buffalo Technology 
Technical Support.