Whirlpool WED4800X User Manual

sensor dryer

fabric 

Use your Dryer Cycle Knob to select available cycles on  

your dryer. Turn the knob to select a cycle for your laundry 

load. See “Cycle Guide” for detailed descriptions of cycles.

 

Will run the dryer for the specified time on the control.  

On models with a selectable temperature knob, you may 

choose a setting based on the fabrics in your load. Drying 

time and temperature will depend on your dryer model.

 

Senses moisture in the load or air temperature and shuts 

off when the load reaches the selected dryness level. 

Gives the best drying in the shortest time. Drying time will 

vary based on fabric type, load size, and dryness setting.

Select a drying temperature based on the fabrics in your 

load. If you are unsure of the temperature to select for a 

load, select the lower setting rather than the higher setting.
NOTE: The Air Only temperature setting (on some models)  

is not available on ACCUDRY™ cycles. 

When you are unable to remove a load of clothes from the 

dryer as soon as it stops, wrinkles can form. The WRINKLE 

SHIELD™ feature periodically tumbles, rearranges, and 

fluffs the load to help keep wrinkles from forming.

n

Get up to 40 minutes of heat-free, periodic tumbling at 

the end of a cycle. Turn the WRINKLE SHIELD™ knob to 

ON or OFF at any time before the cycle has ended.

The End of Cycle Signal produces an audible sound when 

the drying cycle is finished. Promptly removing clothes at 

the end of the cycle reduces wrinkling.
Turn the END OF CYCLE SIGNAL knob to select the  

desired setting (On or Off). Press the PUSH to START knob 

to start the dryer.
NOTE: When the Wrinkle Shield™ setting is selected  

and the End of Cycle Signal is on, the tone will sound every  

5 minutes until the clothes are removed, or the Wrinkle 

Shield™ setting ends.

Not all features and options are available on all models.  

Appearance may vary.

fabric