Whirlpool WED4800X User Manual

Page of 28
8
6.
  
Press PUSH to START to  
begin cycle
Push and hold the PUSH to START knob to begin the cycle.
Promptly remove garments after cycle has completed to reduce 
wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling 
when you are unable to remove a load from the dryer as soon 
as it stops.
4.
 
Set cycle settings and options
Select cycle settings and options by turning the knob to the 
desired position.
NOTE: Not all options and settings are available with all cycles.
TEMPERATURE / Fabric
Turn the TEMPERATURE / Fabric knob to change the drying  
temperature setting. See “Setting the Drying Temperature”.
Wrinkle Shield™ feature (on some models)
n
Get up to 40 minutes of heat-free, periodic tumbling at the 
end of a cycle. Turn the WRINKLE SHIELD™ knob to select 
ON or OFF at any time before the cycle has ended.
3.
 
Select the desired cycle
Select the desired cycle for your load. See the Cycle Guide  
for more information about each cycle. 
ACCUDRY™/AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your 
load, by turning the knob to dryness level. 
Selecting Very Dry, ENERGY PREFERRED, or Less Dry  
automatically adjusts the dryness level at which the dryer will 
shut off. Once a dry level is set, it cannot be changed without 
stopping the cycle.
ACCUDRY™/AUTOMATIC DRY cycles give the best drying in 
the shortest time. Drying time varies based on fabric type, load 
size, and dryness setting.
NOTE: Very Dry removes more load moisture. ENERGY  
PREFERRED is used for a starting point for ACCUDRY™ 
cycles. Choose ENERGY PREFERRED for optimal energy  
savings. Less Dry removes less moisture and used for loads 
you may want to put on a hanger to complete drying.
ENERGY PREFERRED
ACCUDRY
sensor dryer
WRINKLE
 SHIELD 
OFF
Jeans
OFF
OFF
Very Dry
Damp
Dry
Tumble
Press
Cool Down
Less Dry
20
40
50
60
70
Delicate
Cool Down
Heavy
Dry
TIMED 
DRY
WP_WEGD4900XW
TEMPERATURE 
fabric 
  
no
 
he
at
   
     
  kn
its   
     
 
     
   casua
l  
      
he
av
A
ir
 
O
nl
y
    
    L
ow   
       
 Mediu
m
 
H
ig
h
PUSH TO START 
   
   
   
    
 
    
Off
         
 
        On
   
   
   
   
   
    
    
  
    
     
En
d of 
Cycle Sign
al
5.
 
Select End of Cycle Signal  
     (if desired)
Turn the END OF CYCLE SIGNAL knob to select the  
desired setting (On or Off). The End of Cycle Signal produces 
an audible sound when the drying cycle is finished. Promptly 
removing clothes at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Shield™ setting is selected  
and the End of Cycle Signal is on, the tone will sound every  
5 minutes until the clothes are removed, or the Wrinkle 
Shield™ setting ends.
   
   
   
    
   
  O
ff  
       
 
      
 
 
On
WRINKLE SHIELD 
PUSH TO START 
   
   
   
    
 
    
Off
         
 
        On
   
   
   
   
   
    
    
  
    
     
En
d of 
Cycle Sign
al